1, in the dark. Visible light also enables a slow curing adhesive, can therefore not be exposed to air for a long time.
2 and moisture. After the glue moisture absorption performance will decline, and therefore can not be a long time to open the bottle.
3, at room temperature. When the temperature is above 80 degrees, could trigger a chemical reaction, thus glue should not be put in a hot place for a long time.
4, before sizing, make sure you dry adhesive surface clean and smooth. Water, gas, oil, dust, etc. will lead to adhesion performance degradation. In the humid rainy season and winter moisture in the air is easy to form the naked eye is difficult to find on the cold mist of glass, it is recommended in the workshop dry low humidity jobs.
5, after sizing, pressing hard objects to clean the bubbles row. Please select the appropriate viscosity glue according to the actual situation.
6, when cured, not vibrating objects, such as the need to clear residue, according to the actual situation, irradiation with UV light after about 10 seconds to clear the initial curing adhesive residue, and then irradiated to fully cure.
7, water, oil, surface uneven, incomplete curing adhesive and may cause adverse white and so on.